This is a new version release: 188.8.131.52v2. Not sure if this is the right driver or software for your Intel® chipset? Run Intel® Driver & Support Assistant (Intel® DSA) to automatically detect driver or software updates.
Manufacturers of USB 3.0 host controllers include, but are not limited to, Renesas Electronics, Fresco Logic, ASMedia, Etron, VIA Technologies, Texas Instruments, NEC and Nvidia. As of November 2010, Renesas and Fresco Logic have passed USB-IF certification. Motherboards for Intel's Sandy Bridge processors have been seen with Asmedia and Etron host controllers as well. On 28 October 2010, Hewlett-Packard released the HP Envy 17 3D featuring a Renesas USB 3.0 host controller several months before some of their competitors. AMD worked with Renesas to add its USB 3.0 implementation into its chipsets for its 2011 platforms.[needs update] At CES2011, Toshiba unveiled a laptop called "Toshiba Qosmio X500" that included USB 3.0 and Bluetooth 3.0, and Sony released a new series of Sony VAIO laptops that would include USB 3.0. As of April 2011, the Inspiron and Dell XPS series were available with USB 3.0 ports, and, as of May 2012, the Dell Latitude laptop series were as well; yet the USB root hosts failed to work at SuperSpeed under Windows 8.
Various early USB 3.0 implementations widely used the NEC/Renesas µD72020x family of host controllers, which are known to require a firmware update to function properly with some devices.
In January 2013 the USB group announced plans to update USB 3.0 to 10 Gbit/s (1250 MB/s). The group ended up creating a new USB specification, USB 3.1, which was released on 31 July 2013, replacing the USB 3.0 standard. The USB 3.1 specification takes over the existing USB 3.0's SuperSpeed USB transfer rate, now referred to as USB 3.1 Gen 1, and introduces a faster transfer rate called SuperSpeed USB 10 Gbps, referred to as USB 3.1 Gen 2, putting it on par with a single first-generation Thunderbolt channel. The new mode's logo features a caption stylized as SUPERSPEED+; this refers to the updated SuperSpeed Plus protocol. The USB 3.1 Gen 2 mode also reduces line encoding overhead to just 3% by changing the encoding scheme to 128b/132b, with effective data rate of 1,212 MB/s. The first USB 3.1 Gen 2 implementation demonstrated real-world transfer speeds of 7.2 Gbit/s.
On 25 July 2017, a press release from the USB 3.0 Promoter Group detailed a pending update to the USB Type-C specification, defining the doubling of bandwidth for existing USB-C cables. Under the USB 3.2 specification, released 22 September 2017, existing SuperSpeed certified USB-C 3.1 Gen 1 cables will be able to operate at 10 Gbit/s (up from 5 Gbit/s), and SuperSpeed+ certified USB-C 3.1 Gen 2 cables will be able to operate at 20 Gbit/s (up from 10 Gbit/s). The increase in bandwidth is a result of multi-lane operation over existing wires that were intended for flip-flop capabilities of the USB-C connector.
Edit: I can also not seem to remove this update trough the update deletion tool because it does not appear there. Edit 2: I was using a USB-C docking station for this LAN cable and using the ethernet port on my laptop itself instead of that also works, so now I am thinking that its an usb-c driver ethernet issue just like this person: -us/windows/forum/all/blue-screen-after-windows-10-last-update/b9684f23-b572-48fd-9e60-cb7f9c68860d
Plus, if you need to update specific drivers rapidly, you can do this and renew outdated drivers in a few clicks. Hence, to achieve that you only have to use the best update drivers software on your Windows 10 PC.
Case 2. "I tend to copy a lot of stuff to my Kingston USB 3.0 drive to put into my media player in the living room. Since having updated to Windows 10, I get a very slow transfer rate. I used to get around 20-30MB/s in Windows 7, but now the drive gets an extremely slow transferring speed on Windows 10! The copy speed is near 0 bytes!"
GameFirst VI analyzes your usage patterns and the digital signatures of your applications and compares them to a database of over 200,000 apps. The database is regularly updated to ensure that apps are recognized.
Ubuntu thought I was using something called "Gallium 0.4 on AMD CAPE VERDE", which is inaccurate as I'm using a Gigabyte Radeon HD 7770 GHz Edition 1GB video card. So, I went to the Additional Drivers section to download a proper update (as I saw that updating driver's manually wasn't recommended by most on this site)... and found 3.
You can install proprietary graphic card driver from this website . Select the appropriate options in that site and you will see the driver for your graphic card. Make sure you install the most recent one. Also check the release notes and installer notes of the graphic card driver before installing. Make sure your OS meets all the system requirements specified in the release notes. Follow the steps in the installer notes to successfully install your driver. You may also have to completely update your OS before graphic driver installation. If you run into problems(Unity crash,low graphics mode and other such issues) after installing your driver, probably, the driver is not acceptable with your OS. In that case try starting a tty session by pressing Ctrl+Alt+F1. Type your user name and password. Then type:
When it comes to Apple hardware support in the Linux 5.13 kernel not only is support for the Apple M1 SoCs added but the Magic Mouse 2 is also finally being supported in full by the mainline kernel. Plus there are other various interesting HID subsystem updates too this kernel cycle.
Working on the Linux power management code is a never-ending and increasingly important task. The ACPI and power management updates were sent in today for the Linux 5.13 merge window though this isn't as exciting as some of the recent kernels heavy on CPUFreq and P-State changes.
Earlier this month I reported on a WMI temperature driver for Gigabyte motherboards being worked on by an independent developer. That "gigabyte-wmi" driver is now slated for inclusion in the upcoming Linux 5.13 cycle.
Create a fresh drive image before making system changes/Windows updates, in case you need to start over!We all have our own reasons for doing the things that we do. We don't all have to do the same things.Computer Specs
Once the install completes, go through the Settings App and be sure you are satisfied with the other privacy settings.Read through Sections 1 & 2 of AKB2000016 Guide for Windows Update Settings for Win10 so you understand the settings for Windows Update. Section 5 will help you set up Windows Update so you have some control of the updates.
If your computer is on Build 19043.928, you need to update to Sept updates before Oct. 12th. The Crrent Build is 19045.1237. Change your Group Policy settings as above and let Windows Update do the updating. 2b1af7f3a8